75MM Submersible Pumpsets

75MM Submersible Pumpsets

Send Inquiry


  • High Operating efficiency.

  • Copper rotors.

  • Very Sturdy motor, insensitive to voltage fluctuation, unlike normal electric motors.

  • Pumping system can be made fully automatic.

  • Suitable for sites where a pump house is not desired or cannot be built.

  • Can be installed and removal,especially in deep boreholes.

  • Economy in operation due to high overall efficiency.

  • Eliminates the need for elaborate foundations and Pump house arrangements.


    Bore Dia Series Model In L.P.M. Motor h.P. Head at duty range
    200mm Mixed Flow SB 640 to 3200 5.0 to 25.0 11 Mtrs to 120 Mtrs
      Mixed Flow NB 800 to 1640 5.0 to 25.0 20 Mtrs to 112 Mtrs
      Mixed Flow Sq 1360 to 2050 5.0 to 25.0 10 Mtrs to 60 Mtrs


    Power Range 5.0 to 25HP
    Version 380-415V,A.C., 50 Hz,3 Ph
    Speed 2850rpm
    Flow Rate 640 1pm to 3200 1pm
    Total Head Range 10 to 120 Mtr
    Outlet size in inches 75mm & 100mm & 125mm
    Maximum Outer Diameter 192mm
    Type Of Duty S1(Continuous)
    Method Of Starting 3.0 to 7.5HP-D.OL
    S.D. shall be supplied for 7.5 h.p. on specified requirement 10.0 to 25 H.P. –S.D.
    Cable Connection Sheathed PVC insulated 3-core flat cable
    Part Name Material
    Check Valve Housing C.I
    Impeller Bronze/Gun-Metal/SS Cast
    Diffuser C.I
    Pump Shell (Tube) -0
    Pump Shaft S.S. 410/431
    Suction Inter Connector C.I
    Coupling S.S. 410
    Part Name Material
    Upper, Lower, Housing & Motor C. I
    Stator Shell S.S 304 Or equivalent
    Shaft S.S -410/431/Carbon Steel C 45.
    Journal Bush Leaded Bronze
    Thrust Assembly S.S. & Impregnated Carbon